When it comes to the use of a RS-232 interface, the control is carried out through a personal computer with the Windows operating system installed on the null modem cable. One transmitter can be connected to one cable. The maximum length of the cable is up to 15 meters. It is possible to control and control all parameters accessible from the front panel of the transmitter (setting output power, frequency, switching on/off the transmitter, adjusting and monitoring the audio signal levels, monitoring currents, voltages), as well as maintaining a log -file of work will transfer
The redundant unit BR-1 ensures the operation of transmitters in the automatic reservation mode. Depending on the model of the transmitter, either the whole transmitter is reserved or the digital driver is reserved. The nominal load resistance is 50 or 75 Ohm.
The built-in RDS encoder is programmed to transmit static information (for example, the radio station logo, information about alternative frequencies) without connecting an external interface. Information can be changed from the front panel of the transmitter or remotely through a program. Text information is transmitted in the form of eight-character text lines transmitted in PS segments. The number of lines is from 1 to 7. The display period for each line is from 1 to 9 seconds.
To broadcast your radio on the internet, a simple computer with a microphone is enough. However to increase your broadcast quality and professionalize your radio, you can add specific hardware.
The headset helps you hear what’s happening on your radio better than with speakers. The quality is better and allows you to feel closer to the music. These products are provided by Radio Broadcasting Equipment Suppliers.
The headset also allows you to pre-listen songs. When you are live, listening to your broadcast in the headset avoids the effect of Larsen. You can stream easily from the base mic of your computer, if you have one, but having an external mic offers better quality.
The radio microphone, called static microphone, only picks up sound in one direction and greatly reduces external noise as well as the echo effect, which makes it possible to have an irreproachable sound quality. Its sensitivity is high, you do not need to raise the tone to be heard on your radio and it allows a faithful reproduction of sounds.
The main function of a microphone boom is to hold the microphone. The static microphone is quite fragile, it is better to avoid touching it, so the pole serves you to move your microphone without problems. It also allows you to adjust the height and position of your microphone, to choose the most convenient and enjoyable for you.